Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - dclary12

Pages: [1]
1
224 Valkyrie Bolt Gun Troubleshooting / Heavy Barreled Valkyrie
« on: April 09, 2019, 10:25:17 AM »
So far the only issue I Have had is the magazine issue but a 6br conversion kit from primal rights fixed that issue.

2
224 Valkyrie Bolt Gun Accuracy / 1:6.5 twist rate barrel
« on: April 09, 2019, 10:23:00 AM »
Lets see how the twist affects my accuracy. Is anyone else shooting with this twist rate?

3
General Discussion / 224 Valkyrie Suppressed
« on: April 09, 2019, 10:10:06 AM »
I am curious how everyones rigs are operating when shooting with a can. I am and have been looking into Adjustable block to alleviate the blowback and what not because it is definitely over gassed.

4
New Member Introductions / New Member From Illinois
« on: April 09, 2019, 09:46:14 AM »
I am joining this forum to hopefully get as much information as possible. To date I have built (3) 224 Valkyrie AR Style Rifles and have recently completed my first 224 Valkyrie Bolt action Rifle. They are all pieces of work. The cost of the Bolt gun was roughly twice that of the semi autos. Hopefully I can share some knowledge and learn as well.

5
I have been going crazy with the fine tuning on load development. I am wanting to use the 88 Grain ELD-M pills. The following are my results so far. All loads use the same specs.
 COAL=2.2925
Trim case length < 1.600
.224 Hornady 88gr ELD-M
CCI SMALL RIFLE PRIMER

   Varget 23.4 grains
   Varget 23.5 grains
   Varget 23.6 grains
   H4350 24.5 grains < 1 MOA
   Alliant 2000MR 26 grains
   Alliant reloader15 23.9 grains
   Alliant reloader15 24 grains
   Alliant reloader17 26.2 grains ~.5 MOA
   CFE 223 25.3 grains = ~ 1 MOA
   CFE 223 25.4 grains = > 1 MOA
   CFE 223 25.5 grains = > 1 MOA
   BLC-2 26.0 grains = > 1 MOA
   BLC-2 26.1 grains = > 1 MOA
   BLC-2 26.2 grains = > 1 MOA

6
224 Valkyrie Bolt Gun Photo Gallery / 224 Valkyrie Rem700
« on: April 09, 2019, 09:11:24 AM »
Krieger 1:6.5 twist 26 Barrel.   $360
Krg x Ray chassis $467
Action Rem700 223 S/A  $327
Rail 20MOA .  $50
Scope Vortex Razor Gen II $1550
Bolt knob. $25 (MidwayUSA)

Machining cost breakdown:
Recoil lug $35
Extractor. $25
Thread muzzle $65
Knob turn down $40
Redo bolt face. $80
Chambering  $150







Pages: [1]