Author Topic: Bedding the Barrel Extension  (Read 492 times)

Offline DangerousDan

  • Moderator
  • Full Member
  • *****
  • Posts: 153
    • View Profile
Bedding the Barrel Extension
« on: February 14, 2020, 07:58:57 PM »
Iwas wondering if any of you all have Bedded your barrel extensions to your uppers . Was it worth the fuss  any info good or bad would be great  Thanks DD

Offline carnaby

  • Jr. Member
  • **
  • Posts: 72
    • View Profile
Re: Bedding the Barrel Extension
« Reply #1 on: February 14, 2020, 11:28:20 PM »
Absolutely if your fit is not tight. Mega side charge receivers are so tight there's no need. Unless you have to heat the receiver to install the barrel, I always bed with Loctite 243.

Offline DangerousDan

  • Moderator
  • Full Member
  • *****
  • Posts: 153
    • View Profile
Re: Bedding the Barrel Extension
« Reply #2 on: February 15, 2020, 09:28:41 AM »
Absolutely if your fit is not tight. Mega side charge receivers are so tight there's no need. Unless you have to heat the receiver to install the barrel, I always bed with Loctite 243.

Thanks for the reply  I will post my targets after I go out a test this next week Trying to get rid of the ounce in a wile flyer
DD

Offline Hammerhead

  • Sr. Member
  • ****
  • Posts: 260
    • View Profile
Re: Bedding the Barrel Extension
« Reply #3 on: February 16, 2020, 02:52:29 PM »
Lap em and then bed em  8)

Offline DangerousDan

  • Moderator
  • Full Member
  • *****
  • Posts: 153
    • View Profile
Re: Bedding the Barrel Extension
« Reply #4 on: February 16, 2020, 03:13:47 PM »
Yes sir